TRC Product Brochure.
To find out more about our Twin Roll Crusher (TRC) please feel free to download product brochure:
The Twin Roller Crusher (TRC) is designed for flexible particle size reduction of soft to hard materials, which can be dry, or slightly wet and sticky. For materials such as coal, coke, cement clinker, limestone, gypsum, bauxite, salt, oil shale and different types of ores.
The Twin Roll Crusher (TRC):
Find more of Mark & Wedell JAWO Sampling’s particle size reduction here:
To find out more about our Twin Roll Crusher (TRC) please feel free to download product brochure:
The Twin Roller Crusher (TRC) is designed for flexible particle size reduction of soft to hard materials, which can be dry, or slightly wet and sticky. For materials such as coal, coke, cement clinker, limestone, gypsum, bauxite, salt, oil shale and different types of ores.
The Twin Roller Crusher can be used as a primary, secondary or even tertiary crusher.
The TRC consists of an inlet opening, two counter-rotating roll shafts each with independent gear driven motors and a base frame.
The material is fed by gravity into the top inlet opening through a hopper or duct from where it is drawn into the crushing zone, by the two counter-rotating roll shafts, whereby material is crushed between the teeth and the roll bodies.
The twin roll shafts can be driven individually or synchronously controlled. The design ensures a unique self-cleaning action.
Adjustment of the crushing characteristics is possible by adjusting the distance between the roll shafts. The reduction ratio is typically 4:1.
Material type: Soft to hard materials, which can be dry, or slightly wet and sticky.
Drive unit: 2x Gear motors.
Voltage: 400/230 V – 50 Hz or as required.
Sensors: 2x Inductive sensors and 2x Torque switches.
Indicative Dimensions (LxWxH): Small: 950x1200x650 mm. Large: 2000x2250x1550 mm.
Indicative weight: Small: 550 kg. Large: 2450 kg.
Rotor speed: Adjustable. Possible speeds include: 31, 66 and 84 rpm.
Housing material: Painted mild steel.
Roll shaft material: Sverker 21 steel, hardened to 58 HRC.
Particle size (input): 50-300 mm.
Particle size (output): 10-60 mm.
Material flow: Depends on material and rotor speed.
Variants
The TRC comes in 4 different standard variants, which mainly differs in scale and therefore also equipment. An overview of the characteristics of the four different variants can be found in the brochure.
Options
The TRC’s roll shafts come in a variety of geometries equipped with smooth or rough crushing surfaces, with roll geometry and rotation speed to be configured depending on the specific material requirements.