Particle Sampler (PS).

What’s the benefit?

  • The PS performs fully automatic sampling.
  • The unit can be easily operated from the man-manchine interface or from a central control room.
  • In the case of analysing fly-ash samples for example for UBC analysis, the operator may use the information from the PS to optimise the combustion process with respet to fly-ash quality.

What does it do?

The Particle Sampler (PS) is an automatic sampling device for collecting increments of dust or powder from pneumatic transportation pipelines. The automatic sampling is performed over a period of time in order to record average manifestation of the material properties. After a pre-set number of increments have been taken, the bottle below the PS containing the sample is taken to a laboratory for analysis. The PS is among other industries widely used in the power plants for collection of fly ash and can be placed in the ash transporting pipeline or in the related pneumatic blow unit.

How does it do it?

The PS has a pitot inlet opening in the central axis region, allowing it to sample a half-diameter linear transect. Multi-incremental sampling is performed over a fixed time period in order to ensure average values of the material properties.

The PS consists of two main units: (1) the mechanical sampler and (2) the electric/pneumatic control unit. The purging air and the sample container are heated to prevent condensation in the sampling unit, which could otherwise result in blocking. The control box contains the necessary switch buttons, a PLC and a touch panel for operation. The touch panel can be used for setting sampling cycles and the number of increments per composite sample.

 

What are the technical details?

Application: Sampling of particles
Max single sample vol.: 200 ml
Single bottle vol.: 5 l
Power supply: 230V/50Hz or as required
Power consumption: 400 W
Air supply: Min. 6 bar clean oil-free air
Air consumption: 150 litres / sample
Enclosure: IP54
Net weight: 45 kg
Ash temperature: max. 120 ºC

Ambient temperature:
Control unit: 0 – 60 ºC
Humidity: 0 – 95 % (no condensing)

Nota Bene 

The PS operates under the assumption that the ducted cross-section is of sufficiently uniform composition.

For fly ash, the PS can be installed directly in the transport pipeline or in the pneumatic blow unit.