Bucket Sampler (BS).

What’s the benefit

  • Fine particles are kept enclosed in the BS by a cover housing. This also avoids cross-contamination.
  • The BS is easy to install.
  • If space is a constraint the BS is beneficial due to its compact design.

What does it do?

The Bucket Sampler (BS) is designed to extract increments/cuts from a free falling flow of bulk materials in a vertical chute. Representativity is ensured since a complete cross section of the material is collected.

 

Variant 1 (standard):

The Bucket Sampler Chain (BS-C) is delivered with a robust chain system.

 

Variant 2:

The Bucket Sampler Wire (BS-W) is delivered with a robust wire system. The BS-W is preferable for materials containing large amounts of dust or fine particles. The BS-W is well suited for biomass, limestone powders etc.

 

How does it do it?

The BS has a bucket cutter connected to two parallel drivers (chain/wire), moving at a speed of up to 0.6 m/s. The sampler runs the cutter twice through the falling material, after which the sample is emptied through the outlet. Between sampling operations, the bucket is parked above the bottom outlet. An inspection hatch is placed on top of the sampler to facilitate maintenance and replacement of spare parts.

 

What are the technical details?

Housing: Stainless Steel AISI 304/316 or painted carbon steel
Railing system: Stainless Steel AISI 304/316 or painted carbon steel
Carriage: Stainless steel AISI 304/316 or painted carbons steel with Hardox impact plate
Instruments: Inductive Position switches
Gear Motor: SEW or similar
The BS is delivered with either a local control unit or/and is controlled by a M&W central control cabinet depending on concept and preference. The M&W central control cabinet consist of motor control center, circuit breakers, PLC-system and man machine interface.

 

Options

1. The M&W central control cabinet can exchange signals with the client’s control system.

2. It is possible to attach more than one sample bucket. For example, with two buckets the number of increments can be doubled within the same time interval.

 

Nota Bene 1

The BS can be calibrated with respect to the client’s material(s) and local sampling conditions. M&W offers clients a facility for quantitative assessment the performance of the cross-belt sampler on the client’s own material(s), following one or several types of analyses such as variographic or replicate analyses.