Pulverised Fuel Sampler Semi Automatic.

What‘s the benefit?

The Pulverised Fuel Sampler Semi Automatic (PFSSA):

  • Enables calculation of the coal mass-flow, which allows the operator to optimize the combustion process, thus reducing emissions and fuel consumption.
  • Extracts physical samples according to ISO 9931 allowing for particle size analysis used for classifier optimization and determining state of the mill and the fuel properties of the coal going into the boiler.
  • Features an upgraded control box with a built-in PLC, to automatically control the isokinetic sampling flow rate, without any manual intervention.
  • Manually operated sampling lance ensures longevity and reliable performance with minimal risk of equipment failure.
  • Cost-efficient and portable equipment, which is easy to use and fast to install with no comprehensive calibration or setup.
  • Built-in weighing scale lets the operator measure the sample weight directly at the testing site.
  • A single instrument can be used in numerous pipes of different sizes to calculate the absolute and relative fuel mass-flows in each individual pipe.
  • Ensures a dustless insertion in the pipe when used together with the Dustless Connector (DuC) or Dustless Connector Snap Lock (DuC-SL).

PFSSA Product Brochure

To find out more about our Pulverised Fuel Sampler Semi Automatic (PFSSA) please feel free to download the product brochure:

 

Link to brochure

Bjarke Pålsson

Bjarke Pålsson

Co-CEO & Owner

What does it do?

The Pulverized Fuel Sampler Semi Automatic (PFSSA) is a portable fuel particulate analyzer used for sampling fuel particulate flows carried within the airstream. The samples are extracted from the full cross section of the fuel pipe in accordance with the international standard ISO 9931 and can be used to determine the fuel mass-flow in the pipe. The units control box has a built-in PLC to automatically control the sample extraction rate, which ensures isokinetic sampling flow rate is maintained during sampling without any manual control.

For optimal measurements, the PFSSA should be used together with a M&W Dirty Air Pitot (DAP) or Dirty Air Pitot Laser (DAPL) to ensure a fully isokinetic sample. By using the DAPL the PFSSA can receive data directly via Bluetooth.

How does it do it?

The Pulverised Fuel Sampler Semi Automatic (PFSSA) includes a portable aluminum control box, a manual sampling lance with a rotating head with 4 sampling nozzles, a high efficiency precipitating cyclone, a sample bottle, a reinforced compressed air hose, and a power cable for the control box.

The sampling process with the PFSSA begins by automated preheating of the sampling lance, after which the sampling lance is inserted into the fuel pipe through a dustless connection. Once the sampling lance is in place, the sampling sequence is initiated from the operator panel located on the portable control box. The sampling sequence spans four minutes and is carried out according to the ISO 9931 standard. During sampling the isokinetic sample extraction rate is automatically controlled by the PLC on the control box.

During the sequence the operator rotates the sampling head every 15 seconds by turning the sampler head position wheel. This rotation ensures that sampling takes place in all 16 predetermined positions of the sampling plan, covering 64 sampling areas evenly distributed over the cross-section of a circular pipe.

This thorough coverage is essential for accurately capturing the characteristics of the fuel particulates within the pipe. Throughout the sampling sequence the fuel particulates are automatically separated in the cyclone and collected in the sample bottle. After the sampling sequence is completed, the sampling lance is withdrawn from the fuel pipe and the sample bottle is detached. The mass of the fuel sample is then determined with use of the weighing scale conveniently integrated in the control box. The weighing scale directly communicates with a PLC in the control box for immediate and convenient data processing.

In order to ensure isokinetic extraction, we recommend using the PFSSA in combination with the separately available M&W Dirty Air Pitot (DAP) or the M&W Dirty Air Pitot Laser (DAPL) with Bluetooth transmission of data. Both instruments can be used to measure the flow velocity in the fuel pipe prior to the PFSSA measurement. The PFSSA and the DAPL instruments are able to exchange values directly by wireless Bluetooth communication.

 

What are the technical details?

  • Application:
    Sampling of pulverised mineral fuels from pneumatic transport pipes.
  • Recommended install:
    Vertical pipe section away from any bends/obstructions.
  • Data entry:
    According to ISO 9931.
  • Sampling standard:
    210 – 1400 mm diameter.
  • Sample volume:
    Max. 400 ml.
  • Power supply:
    230 V/50Hz or as required.
  • Power consumption:
    800W
  • Air supply:
    Min. 6 bar clean oil-free air
  • Humidity:
    0 – 95% (non-condensation)
  • Particle size:
    < 1.5 mm
  • Operating temp.:
    Pulverised fuel: Max. 100°C
    Control unit: Max. 50°C
  • Protection:
    Sampler: IP44
    Control box: IP40
  • Net weight:
    Sampling unit: ~5 kg
    Control unit: ~17 kg
  • Accessories:
    Dustless Connection: Connection for instruments
    Dirty Air Pitot: Gas velocity measurement

Options.
The PFSSA can be delivered with a Snap Lock Dustless Connector (PFSSA-SL). This product has been developed by M&W in order to help customer to save time and provide an easy way to secure a connection between the fuel pipe and measuring instrument. The design enables insertion of the measuring instrument into the fuel pipe with internal over-pressure which reduces leakage of coal-dust and provides a gas tight sealing.

Nota Bene.
M&W offers customers a facility for quantitative assessment of the performance following one or several types of analysis such as Variographic Characterisation or a Replication Experiment based on the customer’s own material.